Hot Drink or Cold Drink Mode
1
3
Hot Drink Mode Cold Drink Mode
2 3
Press and hold the Brew button.
Connect the machine to the power outlet .
The LED on the button will turn on and blink twice, indicating that the machine has
returned to the factory default setting.
On/Off
Brew
Volume
1. Connect the device to the main socket, the On/Off button
will flash twice in red and twice in blue, indicating power is
well connected.
2. One quick press to the ON/OFF button to turn it on in Red
light, the Volume button and Brew button will be flashing in
blue for 35s about to finish the heating up process.
3. When the Volume button and Brew button stop flashing,
the device is ready for hot drink. in this mode, The Volume
and Brew are indicated large blue light and the ON/OFF
button is indicated in steady RED light.
4.Press the volume button to set the coffee volume.
5.Press the brew button, the coffee come out.
1. Connect the device to the main socket, the On/Off button
will flash twice in red and twice in blue, indicating power is
well connected.
2. Press the ON/OFF button and hold it pressed (about 2
seconds) until the indication light is turned on in BLUE light.
3. When the device enters in the cold drink mode, all the
three buttons are indicated in steady BLUE indication light,
In this mode, heater is switched off.
4.Press the volume button to set the coffee volume.
5.Press the brew button, the coffee come out.
6. Tips : add 2-3 pieces of ice cube into the coffee cup for
cold drink, or fill in 8-10℃ (46-509F) icy water into the water
tank to brew your cold drink.
If the machine enters standby mode, press the On/Off button to turn it back on.
To Next Page
Loading...