July 2017 PLT-01067, Version: A.7
Reader Configuration Page 8-5
8.3 Data Mapper
This process loads the Data Mapper information to the Reader Data Config Card.
1. Select Reader Configuration module.
2. Select Data Mapper from the Selected Plugin field.
3. Select the Reader Auth Keys. This is the key used by the reader to authenticate the
configuration card and read/apply the configuration to the reader.
4. Two Data Mapper configurations can be created (Data Map #1 and Data Map #2 shown above).
Click Create / Modify for each as needed. This will open the Data Mapper Wizard.
To Next Page
Loading...