58 September 2017
Printer Preferences PLT-03159, Rev A.0
4. Select and drag to enlarge the area and move it to the preferred location on the card. The size
and coordinates of the area update the number fields (inches or mm).
Field Description
Overlay/Print Area
Full Card Select this option to overlay and/or print the entire card.
Defined Area(s) Select this option to overlay and/or print only in the selected and define an
area(s).
Undefined Area(s) Select this option to overlay and/or print in the space outside the selected and
defined area.
Omit Smart Chip Area Select this option to overlay and/or print only in the space outside the
standard location of a smart chip.
Omit Mag Strip Area Select this option to overlay and/or print only in the space outside the
standard location of an ISO-standard magnetic stripe.
Omit Signature Area Select this option to overlay and/or print only in the space outside the
standard location of a signature panel.
For Print and Overlay This option applies the defined area to both the print and overlay processes.
To Next Page
Loading...
