HID Fargo DTC5500LMX - Page 50

To o l Box Page 4-8
PLT-02496, Version: 1.0 November 2015
Mag Lo-Co Voltage
Offset
This setting is a calibration driven value and should not be adjusted.
Note: This is factory set and should not be changed unless directed by a
technician.
Ribbon Green LED Level
This setting is a calibration driven value and should not be adjusted.
Note: This is factory set and should not be changed unless directed by a
technician.
Ribbon Blue LED Level
This setting is a calibration driven value and should not be adjusted.
Note: This is factory set and should not be changed unless directed by a
technician.
Setting Description