16 September 2018
Specifications PLT-02931, Rev. A.0
1.6 Technical specifications
Component Description
Card cleaning Replaceable cleaning roller (included with each print ribbon). Recommended cleaning
cycle after 2,000 cards.
Card materials and types ႑ Press polished PVC
႑ Composite (PET/PVC with PVC as an outer layer)
႑ Laminated PVC (credit card construction)
႑ 100% PETG
႑ 100% Polycarbonate
Card sizes supported These card printers accept standard CR-80 sized cards (3.370" L x 2.125" W / 85.6 mm
L x 54 mm W) with a thickness of 30 mil.
Dimensions (H x W x D) Printer: 11.50" x 14.50" x 12" (292 mm x 368 mm x 305 mm)
Printer with dual-sided module: 11.50" x 19.75" x 12" (292 mm x 501 mm x 305 mm
Display OLED graphical display
Encoding options Magnetic stripe:
႑ ISO compliant, dual high/low coercivity, Tracks 1, 2 and 3
႑ JIS II mag
႑ Custom and raw
Contact and contactless smart card:
႑ Contact—OMNIKEY® 5122
႑ Contactless—OMNIKEY 5127 CK Mini
႑ Programmer—OMNIKEY 5127 CK SI
HID Global certified supplies Note: The HDP6600 printer requires highly specialized print ribbons to function
properly. To maximize printer life, reliability, printed card quality and durability,
you must use only HID Global certified supplies. For this reason, your HID Global
warranty is void, where not prohibited by law, if you use non-HID Global certified
supplies. To order additional materials, please contact your authorized reseller.
Hopper capacity—input ႑ 100 cards, 30 mil—standard hopper
႑ 200 cards, 30 mil—dual-input hopper (optional)
Hopper capacity—output 200 card output hopper capacity, 30 mil
Interface ႑ USB 2.0 (high speed)
႑ Ethernet with internal print server
႑ Interfacing information for E-card options
HDP film options Clear film, 1,500 prints
HDP film storage
temperature
77° F (25° C) or lower for no longer than 1.5 years.
Memory 1 GB
To Next Page
Loading...
