2.5 Installing the HDP film
FARGO® High Definition printers require highly specialized supplies to function properly. This printer uses a refillable
HDP film drawer. To maximize the printer durability, reliability and printed card quality, you must use only FARGO®-
certified supplies. If not using FARGO-certified supplies, your FARGO warranty is void, where not prohibited by law.
1. Open the front door.
2. Slide out the HDP film drawer by pulling on the gray handle.
Be careful not to touch the hot roller surface identified with this symbol.
3. Unlatch and raise the accumulator unit. Twist the accumulator unit 90° to the right.
PLT-02931, A.4 18 November 2021
Powering
Trusted Identities
FARGO® HDP®6600 High Definition Card Printer/Encoder
User Guide
To Next Page
Loading...
