7. Select the type of connection for the printer.
l
If you are connecting to a local connection, select Local Connection (USB)and click Next.
l
If you are connecting to a network, select Network Connection (Ethernet) and do the following:
a. Connect the Ethernet cable to the printer.
b. Enter the IP address of the printer.
c. Connect the printer to a power source and turn it on.
d. Click Next.
PLT-02931, A.4 29 November 2021
Powering
Trusted Identities
FARGO® HDP®6600 High Definition Card Printer/Encoder
User Guide
To Next Page
Loading...
