8. The HID Printer Status Monitor can be installed with the driver. This is recommended and the checkbox is selected
by default. The HIDStatus Monitor is used to provide information about the printers connected to this computer.
Click Next.
9. The Ready to Install window is displayed. Click Next to begin the installation.
10. If you are using a local connection (USB), the Plug and Play window is displayed to prompt you to turn on the printer
and connect the USB print cable. When the connections are recognized, the installation continues.
PLT-02931, A.4 30 November 2021
Powering
Trusted Identities
FARGO® HDP®6600 High Definition Card Printer/Encoder
User Guide
To Next Page
Loading...
