HID FARGO HDP 6600 - Page 44

Device Settings
Menu option Description
Card Flattener This option is available only for single-sided card printing and is grayed out if a card flattener is not detected.
Available options are:
Enabled: Select this option to enable the flattener.
Advanced Settings:This option is grayed out unless the Enabledoption is selected. When selected, the Card
Flattener window is displayed.
Temperature (Celsius):
l
Lower limit: 100
l
Upper limit: 200
Dwell Time (seconds per inch): Sets the Dwell Time for the flattening process.
l
Lower limit = 1 second per inch
l
Upper limit = 3 seconds per inch
Delay (Seconds): Sets the Delay for the flattening process.
l
Lower limit = 0
l
Upper limit = 15
Use Defaults Based on Selected Card Type:This option is automatically selected. Clear this box to set the
options in this window.
If you select the wrong option, the incorrect dwell time and temperature may be used in the flattening process
which may result in card warping.
PLT-02931, A.4 44 November 2021
Powering
Trusted Identities
FARGO® HDP®6600 High Definition Card Printer/Encoder
User Guide