HID FARGO HDP 6600 - 3.5.5 Self tests

Color Changes the color of the sample text on the card. This field is available when the Show Textoption is
selected.
Size Changes the font size of the sample text on the card. This field is available when the Show Text option is
selected.
3.5.5 Self tests
Provides the ability to run control feature commands resident in the firmware to exercise motors and sensors in the
printer. These tests allow you to isolate printer functions and run them to determine operational status.
Field Description
Poll for Sensor Status When selected, each sensor is checked at the interval specified by the Polling Interval: (sec.) field.
Update Display When selected, the Printer Display Panelreflects what is shown on the printer display.
Polling Interval: (sec.) Sets the number of seconds to wait before each check of the printer status. Available values are 1 to 30
seconds.
Sensor/Value Shows the list of printer sensors and their default values.
Printer Display Panel Shows the current printer display. This window updates as the printer status changes.
PLT-02931, A.4 70 November 2021
Powering
Trusted Identities
FARGO® HDP®6600 High Definition Card Printer/Encoder
User Guide