HID Fargo HDP8500 - Using the Printer LCD Display to set the language

© 2012 HID Global Corporation. All rights reserved.
119
HDP8500 Industrial Card Printer/Encoder User Guide L001617 rev 1.1
Do not show this message again. The check box allows the User to suppress message per
Driver instance. Default = unchecked.
Selecting the LCD Display Language
The LCD Display Language can be chosen or changed from the Driver Toolbox Configuration
tab or directly from the LCD Display.
The last language chosen from any of these methods is the active language for the LCD.
English is the default.
Languages (available in drop down list) are the languages available in the language set
(currently resident in the Firmware).
Using the Printer LCD Display to set the language
Select the Folder icon Select the Settings icon
Use the arrow to select the language.