© 2012 HID Global Corporation. All rights reserved.
128
HDP8500 Industrial Card Printer/Encoder User Guide L001617 rev 1.1
Using the Image Darkness Option
Use this option to set the overall darkness of the printed image by increasing or decreasing the
amount of heat used by the Printhead when printing.
Lighten the printed image by clicking the down arrow to enter a negative
value and decrease the amount of Printhead heat.
OR
Darken the image by clicking the up arrow to enter a positive value and
increase the amount of Printhead heat.
IMPORTANT: If the value is set too high, the Ribbon may jam or even
break.
To Next Page
Loading...
