1.1 MR16in processor
The MR16in processor provides a solution to the OEM system integrator for sensor monitoring and output control.
The MR16in has sixteen non-supervised/supervised inputs and two Form-C contact relays for load switching. In addition,
two digital inputs are used for cabinet tamper and power fault status monitoring.
The MR16in processor requires 12 to 24 V DC for power.
PLT-05250, A.1 4 August 2022
Powering
Trusted Identities
HID®Mercury™ MR16in-S3 Processor
Installation and Specifications
To Next Page
Loading...