HID VertX EVO V1000 - Page 11

July 2016 Page 11 of 25
see
VertX EVO V1000 User Guide, 71000-901, Rev. A.4
They can be configured for supervisory resistors of 1K – 6K Ohm. The setup of
supervised inputs should be done during configuration of the VertX EVO devices
through the host.
Example: Input 1, V1000 is: P14 Pin1 is + (plus) and Pin 2 is – (minus).
Except for the door monitor, all other inputs default to NO, unsupervised:
Supervised inputs can be configured for:
Input Number
V1000
1
P14 Pins 1/2
2 P11 Pins 4/3
3
P7 Pins 8/7 - Tamper
4 P7 Pins 6/5 - AC Fail
5
P7 Pins 4/3 - Batt Fail