• Mini adapter for regular earphone jack
• Frequency Response: 15Hz-22KHz
• Impedance: 16 Ohms
• Sensitivity: 102 dB/mW
• Weight: 0.48Oz (13.7g)
Package Contents
(1) 4-pin Balanced to 3-pin Normal Adapter
(2) Pair Bi-flange (small)
(2) Pair Bi-flange (large)
(2) Pair Mono-flange (small)
(1) Pair Comply Tips(Medium)
(1) Pair Comply Tips(Large)
(10) Filters
(1) Cable Management System
(1) Earphone Carry Pouch
How to wear
Before using your earphones, make sure the volume is down on your device. There will be
a small (R) and (L) on the black stress relief of the earphones denoting the right and left.
Place earphone in your canal and using a gentle twisting motion push into your ear canal
until you get a secure fit. The cable should exit straight down (fig. 1). You may have to try
different size ear tips to get the correct fit and level of comfort.
If you desire to wear the cable in the “over the ear” style (fig. 2), follow the steps above,
but the cable should exit to the top at a slight angle. You may need to adjust the angle to
get the right level of comfort and secure fit.
Caution
1. Please do not wear earphones while operating any type of vehicle.
2. Use caution when using headphones while walking, jogging, cycling, etc.
Normal
To Next Page
Loading...
