26 EN
Using the appliance
B
• In accordance with regulations 1015/2010 and 1061/2010, programmes 3 and 4 are the
"standard cotton 60°C programme" and the "standard cotton 40°C programme" respectively.
• The Eco 40-60°C programme is used to wash normally soiled cotton laundry in the same
cycle, whether it is washable at 40°C or 60°C. This programme is used to assess compliance
with European ecodesign legislation.
• The most energy-efficient programmes are usually those that work at lower temperatures
over longer periods of time.
• Complying with the manufacturer's recommended capacity for each programme when
loading the household washing machine will help to save energy and water.
• The programme duration, energy consumption and water consumption values may vary
depending on the weight and type of load to be washed, the additional functions selected, the
quality of the tap water and the ambient temperature.
• It is recommended that liquid detergents are used for low temperature wash programmes.
The amount of detergent to be used may vary depending on the amount of laundry and
how dirty this is. Follow the detergent manufacturer's recommendations for the amount of
detergent to use.
• The noise level and residual humidity depend on the spin speed. The higher the spin speed
during the spin phase, the louder the noise level and the lower the residual humidity level.
• You can access the product database in which the model information is stored by scanning
the QR code on the energy label.
Programme
name
Nominal
capacity
(kg)
Energy
consumption
kWh/cycle
Programme duration
Hours: Minutes
Water
consumption
Litres/
cycle
Max.
Temperature
°C
Residual humidity
level %
800 rpm
Nominal capacity
1/2 load
1/4 load
Nominal capacity
1/2 load
1/4 load
Nominal capacity
1/2 load
1/4 load
Nominal capacity
1/2 load
1/4 load
Nominal capacity
1/2 load
1/4 load
Cot-
ton
90°C
5 2.22 02:56 69 81 71%
Cot-
ton
60°C
5 0.78 03:10 45 46 71%
To Next Page
Loading...
