31 EN
Useful information
C
• The drain pump filter is located behind the access hatch in
the lower right-hand corner at the front of the machine.
To clean the drain pump filter:
1
Use the washing powder scoop (*) supplied with the
machine or the liquid detergent graduated rule to open the
pump access hatch.
2
Insert the end of the washing powder scoop or the liquid
detergent graduated rule into the access hatch opening and
press gently backwards. The access hatch opens.
• Before opening the filter access hatch, place a container
underneath to collect the residual water in the machine.
• Loosen the filter by turning it anti-clockwise, then pull it
out to remove it. Wait for the water to flow out.
PLEASE NOTE : Depending on the amount of water inside
the machine, the collection container may need to be
emptied several times.
3
Use a soft brush to remove any foreign object that may be
present in the filter.
4
After cleaning, replace the filter by inserting it and turning
it clockwise.
To Next Page
Loading...
