6
EN
Using the appliance
B
IMPORTANT:
• The water discharge house must be installed at a height
of 80 cm maximum.
• The water discharge hose must not be bent between the
outlet and the product, folded or stepped over.
Adjusting the Feet
• For the dryer to work with less noise and vibration, it must be stable and balanced on its
feet. Adjust the feed to ensure that the product is balanced.
• Rotate the feet to the right and to the left until the dryer is even and stable.
IMPORTANT:
Never remove the adjustable feet.
Electrical Connection
ATTENTION:
There is risk of fire and electric shock.
• Your dryer is set to 220-240 V and 50 Hz.
• The mains cable of the dryer is equipped with a special plug. This plug must be connected
to an earthed socket protected by a fuse of 16 Amperes as indicated on the type plate. The
fuse current rating of the power line where the outlet is connected must also be 16 amperes.
Consult a qualified electrician if you do not have such an outlet or fuse.
• Our company cannot be held responsible for damages resulting from usage without
earthing.
To Next Page
Loading...
