HSD1140 A/B/C
INSTRUCTIONS
USAGE
• Neon pen writing board
• Can display date, time, or temperature
• 12hr or 24hr time display
• Celsius or fahrenheit temperature display
• 3 set alarms and snooze function
• Birthday message
• Timer and stopwatch function
• Plays 16 classical songs
• Calendar year 2000 to 2099
• 1 to 4 USB ports
PRODUCT DIAGRAM
INSTRUCTIONS FOR USAGE
1 - Battery Installation & External Power Supply
Open battery cover and insert the provided three AAA batteries. If
the batteries are installed correctly, the product should automatically
start, display panel will reset the time and temperature to 25 degrees
celsius, and will produce a ‘beep’ sound. If not, please reinstall the
batteries.
2 - Display Mode
i) Plug in external power source. The time background display and
writing board will light up. If not plugged in, the background light
will turn off after 10 seconds.
ii) If no buttons are pressed, the screen will turn off in 10 seconds and
display panel will automatically change back to time display.
iii) When the time display is on, press the ‘up’ key continuously to get
the following display modes:
Static Display: Time > Temperature > Year > Month & Day
Scrolling Display: Time > Temperature > Year > Month & Day
3 - Search, Setting Function
i) When displaying the time, press ‘M’ (for Mode) continuously to get
the following modes:
Time > Temperature > Year > Month & Day > Alarm 1 > Alarm 2 >
Alarm 3 > Birthday Message > Timer > Time
ii) In any display mode, press and hold the ‘S’ (for Set) button for 3
seconds to go into setting mode. Press ‘Up’ or ‘Down’ to change
settings. Press ‘S’ again to save.
iii) In setting mode, press and hold ‘Up’ or ‘Down’ for 3 seconds to
speed up setting process.
iv) In setting mode, press ‘M’ to save current setting and move on to
the next display mode.
4 - Time Settings
When in time display mode, press and hold ‘S’ for 3 seconds. 12 hr or
24hr display mode will ash. Press ‘S’ again to enter time setting
mode - the 'Hour' will start ashing. Press ‘S’ again and the 'Minutes'
will start ashing. Press ‘Up’ or ‘Down’ to set the time.
5 - Temperature Settings
When in temperature display mode, press ‘S’ to switch between
Celsius or Fahreinheit display.
6 - Calendar Settings
i) When in Year display mode, press and hold ‘S’ for 3 seconds. 'Year'
will ash. Press ‘S’ again to enter Day & Month/Month & day display
selection. ("M,D" stands for Month, Day. ‘D,M’ stands for Day, Month.)
ii) When in Month, Day display mode, press and hold ‘S’ for 3 seconds
to enter Month settings. Press ‘Up’ or ‘Down’ to set the date.
7 - Alarm and Snooze Function
i) In Alarm display, Alarm(1) will ash. Press ‘Up’ or ‘Down’ to select
Alarm 1 ring tone. Press ‘S’ to turn Alarm1 on or off. If Alarm is off, the
display will look like --:--, or the alarm time will be displayed. Press
and hold ‘S’ for 3 seconds to set the alarm.
ii) Alarm's on/off status will be displayed in the normal time display
mode.
iii) In time display mode, press and hold the ‘Down’ button for 3
seconds to turn off or turn on alarms.
iv) In time display mode, press and hold 'Up' button for 3 seconds to
turn off or on Snooze function for all alarms. If snooze button is on,
there will be a snooze icon on the display.
v) Alarm will ring for 1 minute. If snooze is on, alarm will ring once
every 5 minutes for 3 times.
vi) Press any key to stop alarm.
8 - Birthday Message
i) When birthday message mode is displayed, a candle icon will
ash. Press 'S' to turn the birthday message function on or off. When
it's off, the birthday display will look like --:--, or will display the time
of the birthday message.
ii) To set the birthday date and time, press and hold 'S' button for 3
seconds to enter birthday settings. Press 'S' again to enter Month,
Day settings. Press 'S' again to enter Hour, then Day, press 'Up' or
'Down' to set. Press 'S' after selection to return to birthday display
mode.
iii) When in time display mode, the candle icon will be on if birthday
message is enabled. Birthday message will ring for 1 minute. Press
any button to stop.
9 - Timer and Stopwatch
i) When in stopwatch mode, an hourglass icon will ash. Press and
hold 'S' for 3 seconds to enter timer settings. Press 'S' button to set
minutes, seconds, turn on, or pause. Press 'up' or 'Down' button to
change ashing selection. Timer can be set from 0 minutes 1 second
to 99 minutes 59 seconds. When timer reaches 0, ringtone will
sound for a minute. Press any key to stop.
ii) When the stopwatch is paused, press 'Up' or 'Down' for 3 seconds
to reset the stopwatch to 0.
iii) When in time display mode, the hourglass icon will ash if timer
is on.
10 - USB Hub Usage
i) Plug in USB into computer to use. The 4 USB ports can be
plugged in to various kinds of products. This USB hub supports:
Windows 98 / Windows2000 / 2003 / Windows XP / Windows Vista /
Linux / Mac OS X systems.
11 - Message Board Usage
i) Use the neon pen included in the product package. Use the
eraser at the tip of the pen to erase.
1) If the product display is blurry, the colour of the light is fading, or
the ringtone sounds weak, then the batteries need replacing.
2) If any functions are not performing well, detach the batteries or
reconnect the USB cable.
3) If any functions are not working properly after batteries are
replaced, please contact professional repair services.
CAUTION
Need help?
General
