Multi-Spectrum Binocular User Manual
50
Laser
When any laser equipment is in use, make sure that the
device lens is not exposed to the laser beam, or it may
burn out. The laser radiation emitted from the device
can cause eye injuries, burning of skin or inflammable substances. Before
enabling the laser ranging function, make sure no human or inflammable
substances are in front of the laser lens. Do not place the device where
minors can fetch it. The wavelength is 905 nm, and the max. power output
is less than 1.15 mW. According to IEC 60825-1:2014 and EN 60825-
1:2014+A11:2021, this laser product is classified as Class 1 laser product.
Manufacture Address
Room 313, Unit B, Building 2, 399 Danfeng Road, Xixing Subdistrict,
Binjiang District, Hangzhou, Zhejiang 310052, China
Hangzhou Microimage Software Co., Ltd.
COMPLIANCE NOTICE: The thermal series products might be subject to
export controls in various countries or regions, including without limitation,
the United States, European Union, United Kingdom and/or other member
countries of the Wassenaar Arrangement. Please consult your
professional legal or compliance expert or local government authorities
for any necessary export license requirements if you intend to transfer,
export, re-export the thermal series products between different countries.
To Next Page
Loading...