Hikmicro HM-TM36-LG/D - Page 29

26
0xF),
0x3N to move N digits
downwards the cursor (N is
0x1 to 0xF),
0x4N to move N digits
leftwards the cursor (N is 0x1
to 0xF),
0x5N to move N digits
rightwards the cursor (N is 0x1
to 0xF),
Send dead pixel coordinates.
0x36
0x78
0x20
4 Palettes
0x0: White Hot
0x1: Black Hot
0x2: Fusion
0x3: Red Hot
Default: White Hot
0x0
0x36
0x78
0x23
0x0: Auto Mode
Histogram Mode
0x0
0x36
0x74
0x0F
Restore parameters of
thermal camera module to
factory settings.
Restore to Factory Settings
0x36
0x74
0x10
Saving modified parameters of
thermal camera module ISP.
Save User Settings
0x36
0x70
0x11
0x0: None
0x1: Left/Right
0x2: Up/Down
0x3: Center
Mirror
0x0
0x36
0x70
0x12
0x0: X1
0x1: X2
0x2: X4
0x3: X8
Zoom
0x0
0x36
0x7C
0x0D
0x0: RAW +YUV
0x1: BT.656
Data Switching
0x36
0x70
0x17
0x00: M key (Confirm/Enter)
0x01: C key (Exit,
Enable/Disable Reticle)
0x02: + key
0x03: Hold + key
0x04: - key
0x05: Hold - key
0x06: Press + key and – key
(FFC)
0x07: Press M key and C key
See Chapter 5. Key
Operation for detailed key
operation.