EasyManuals Logo

Hikmicro Pocket 2 User Manual

Hikmicro Pocket 2
12 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #10 background imageLoading...
Page #10 background image
5
DO NOT charge other battery types with the
supplied charger. Confirm there is no flammable
material within 2 m of the charger during
charging.
For long-term storage of the battery, make sure it
is fully charged every half year to ensure the
battery quality. Otherwise, damage may occur.
DO NOT place the battery near heating or fire
source. Avoid direct sunlight.
DO NOT swallow the battery to avoid chemical
burns.
DO NOT place the battery in the reach of children.
When the device is powered off and the RTC
battery is full, the time settings can be kept for 6
months.
In the first use, charge the device for more than
2.5 hours in the power-off status.
The battery voltage is 3.85 V, and the battery
capacity is 2100 mAh.
The battery is certified by UL2054.
Maintenance
If the product does not work properly, please
contact your dealer or the nearest service center.
We shall not assume any responsibility for
problems caused by unauthorized repair or
maintenance.
A few device components (e.g., electrolytic
capacitor) require regular replacement. The
average lifespan varies, so periodic checking is
recommended. Contact your dealer for details.
Wipe the device gently with a clean cloth and a
small quantity of ethanol, if necessary.
If the equipment is used in a manner not specified
by the manufacturer, the protection provided by
the device may be impaired.
We recommend you send the device back for
calibration once a year, and please contact the
local dealer for the information on maintenance
points.
Using Environment
DO NOT expose the device to extremely hot, cold,
dusty, corrosive, saline-alkali, or damp
environments. Make sure the running
environment meets the requirement of the
device. The operating temperature shall be -10 °C
to 50 °C (14 °F to 122 °F), and the operating
humidity shall be 95% or less.
This device can only be safely used in the region
below 2000 meters above the sea level.
Place the device in a dry and well-ventilated
environment.
DO NOT expose the device to high
electromagnetic radiation or dusty environments.
DO NOT aim the lens at the sun or any other
bright light.
When any laser equipment is in use, make sure
that the device lens is not exposed to the laser
beam, or it may burn out.
The device is suitable for indoor and outdoor uses,
but do not expose it in wet conditions.
The level of protection is IP 54.
The pollution degree is 2.
Emergency
If smoke, odor, or noise arises from the device,
immediately turn off the power, unplug the
power cable, and contact the service center.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Hikmicro Pocket 2 and is the answer not in the manual?

Hikmicro Pocket 2 Specifications

General IconGeneral
Thermal Sensitivity< 40 mK
ConnectivityUSB-C
Accuracy±2°C or ±2%
Frame Rate25 Hz
FocusFixed
Digital Camera Resolution8 MP
Storage Temperature-20°C to 60°C
Image FormatJPEG
Video FormatMP4
Resolution256 x 192
Image ModesThermal, Fusion
Storage16 GB
Battery Life4 hours
Battery TypeLi-ion
Spectral Range8 to 14 μm
Temperature Range-20°C to 400°C
Display3.5" LCD Touch Screen
Operating Temperature-10°C to 50°C

Related product manuals