BREAKER
250V~,15A
INPUT
220V~,50Hz
OU TPU T 220V~
+
OUTPUT
SOCKET
AC INPUT
BREAKER
USB Interface
LCD display
ON/OFF Switch
1 .With the UPS unit off and unplugged, connect the
computer, monitor, and any extemally powered data
storage device Zip drive Jazz drive Tape drive)etc. ( , ,
Into the battey power supplied outiets. DO NOT plug
a laser printer, copier, space heater, vacuum, paper
shredder or other large electrical device into the battery
power supplied outlets. The power demands of these
devices will overload and possibly damage the unit.
2. Plug the UPS into a 2 pole, 3 wire grounded
receptacle (wall outlet). Make sure the wall branch
outlet is protected by a fuse or circuit breaker and
does not service equipment with large electrical
demands e.g.air conditioner refrigerator copier( , , , etc ,
Avoid using extension cords.)
To Previous Page
Loading...