1. Under certain extreme dust circumstances, the coating film on the
enclosure of this equipment may generate an ignition-capable level
of electrostatic charge. Therefore the equipment shall not be
installed in a location where the external conditions are conducive
to the build-up of electrostatic charge on such surfaces. In addition,
the equipment shall only be cleaned with a damp cloth.
2. Specific guidance noted to contact the original manufacturer for
information on the dimension of the flameproof joints.
3. The fasteners of window cover shall only be replaced with the
identical part No. SC-HSCSM6X15L11-SUS316L-DAC.
Industry Canada ICES-003 Compliance
This device meets the CAN ICES-3 (A)/NMB-3(A) standards
requirements.
Warning:
This is a class A product. In a domestic environment this product may
cause radio interference in which case the user may be required to
take adequate measures.
이 기기는 업무용 환경에서 사용할 목적으로 적합성평가를
받은 기기로서 가정용 환경에서 사용하는 경우 전파간섭의
우려가 있습니다.
Symbol Conventions
The symbols that may be found in this document are defined as
follows.
To Next Page
Loading...
Need help?
General
