● DO NOT drop the product or subject it to physical shock. Keep
the device away from magnetic interference.
Power Supply
● Please purchase the charger by yourself. Input voltage should
meet the Limited Power Source (100 to 240 VAC) according to
the IEC62368 standard. Please refer to technical specifications
for detailed information.
● Make sure the plug is properly connected to the power socket.
● The socket-outlet shall be installed near the equipment and shall
be easily accessible.
● DO NOT connect multiple devices to one power adapter, to avoid
over-heating or fire hazards caused by overload.
● DO NOT touch the bare metal contacts of the inlets after the
circuit breaker is turned off. Electricity still exists.
● + identifies the positive terminal(s) of equipment which is used
with, or generates direct current. - identifies the negative
terminal(s) of equipment which is used with, or generates direct
current.
● The equipment must be connected to an earthed mains socket-
outlet.
● A readily accessible disconnect device shall be incorporated
external to the equipment.
● An all-pole mains switch shall be incorporated in the electrical
installation of the building.
● Ensure correct wiring of the terminals for connection to an AC
mains supply.
● The equipment has been designed, when required, modified for
To Next Page
Loading...
Need help?
General
