HIKVISION DS-2TD6267-75C4L/WY - Conduct Regional Focus; Light; Operate Wiper

Click to start full screen mode and press ESC buon to exit.
10.1.6 Conduct Regional Focus
You can enable the funcon to focus on certain area.
Steps
1.
Click
to enable regional focus.
2.
Drag the mouse on the live view to draw a rectangle as the desired focus area.
3.
Click
to disable this funcon.
10.1.7 Light
Click to turn on or turn o the illuminator.
10.1.8 Operate Wiper
For the device that has a wiper, you can control the wiper via web browser.
Note
Wiper operaon and sengs vary on device models.
Steps
1.
Go to Conguraon → PTZ → Wiper .
2.
Select a wiper mode.
One
Time
The wiper wipes one me when you click on live view page.
Cycle The wiper works on schedule at set wiping interval. Click on live view to start
wiping.
Duraon
The schedule in which the wiper is ready to work.
Interval
The interval between two successive wiping acons.
Auto
Note
Auto mode is only available for device that supports rain-sensing auto wiper.
In auto mode, the wiper works when rain drops on the window.
Thermal & Opcal Bi-spectrum PTZ Network Camera User Manual
58