HIKVISION DS-2TD6267-75C4L/WY - Video Standard; Digital Zoom; Zoom Limit; Local Video Output

Note
The video recording will be shortly interrupted when the funcon is enabled.
11.5.23 Video Standard
Video standard is an ability of a video card or video display device that denes the amount of
colors that are shown and the resoluon. The two most common video standard used are NTSC
and PAL. In NTSC, 30 frames are transmied each second. Each frame is made up of 525 individual
scan lines. In PAL, 25 frames are
transmied each second. Each frame is made up of 625 individual
scan lines. Select video signal standard according to the video system in your country/region.
11.5.24 Digital Zoom
You can zoom in the image. The larger the zoom size is, the more blurred the image is.
11.5.25 Zoom Limit
You can set a certain value to limit the maximum value of zooming.
11.5.26 Local Video Output
If the device is equipped with video output interfaces, such as BNC, CVBS, HDMI, and SDI, you can
preview the live image directly by connecng the device to a monitor screen.
Select the output mode as ON/OFF to control the output.
11.6 OSD
You can customize OSD (On-screen Display) informaon such as device name, me/date, font,
color, and text overlay displayed on video stream.
Go to OSD
seng page: Conguraon → Image → OSD Sengs .
Select a channel.
Set the corresponding parameters, and click Save to take
eect.
Character Set
Select character set for displayed
informaon. If Korean is required to display on screen, select
EUC-KR. Otherwise, select GBK.
Displayed
Informaon
Set camera name, date, week, and their related display format.
Thermal & Opcal Bi-spectrum PTZ Network Camera User Manual
76