HIKVISION DS-2XS6A87G1-LS/4G - Chapter 10 VCA Resource; 10.1 Allocate VCA Resource

Chapter 10 VCA Resource
VCA resource is a collecon of smart funcons supported by the device.
10.1 Allocate VCA Resource
VCA resource oers you opons to enable certain VCA funcons according to actual needs. It helps
allocate more resources to the desired
funcons.
Steps
1.
Go to VCA → VCA Resource .
2.
Select desired VCA
funcons.
3.
Save the sengs.
Note
Certain VCA funcons are mutually exclusive. When a certain funcon or funcons are selected
and saved, others will be hidden.
10.2 Set Camera Info
Customize specic informaon for the device. It may help idenfy a certain device when mulple
devices are under management.
Go to VCA → General VCA
Sengs to set Device No. and Camera Info.
10.3 Smart Event
Note
●
For certain device models, you need to enable the smart event funcon on VCA Resource page
rst to show the funcon conguraon page.
●
The funcon varies according to dierent models.
10.3.1 Set Intrusion Detecon
It is used to detect objects entering and loitering in a predened virtual region. If it occurs, the
device can take linkage
acons.
Network Camera User Manual
89