HIKVISION DS-2XS6A87G1-LS/4G - Advanced Parameters Configuration; Import or Export Blocklist & Allowlist

Overlay
You can overlay camera, device or vehicle informaon on the captured image and click to
adjust the order of overlay texts.
FTP Picture Name
You can set the naming rule for captured pictures in vehicle
detecon and mixed-trac
detecon in the FTP server.
Select Default to use the default rule.
Select Custom, select
informaon for the picture name, and click to adjust the order of
picture name parameters. If Capture Time is not selected in custom mode, the captured picture
triggered by the same vehicle later will replace the captured picture before due to the same
picture name.
Note
For more informaon about FTP sengs, refer to Set FTP .
10.4.4 Advanced Parameters Conguraon
Go to VCA → VCA Resource , and select Road Trac.
Go to VCA → Road
Trac → Advanced Parameters Conguraon . Set the parameters and click
Save.
Version
It stands for the current algorithm version.
Overlay Intelligent
Informaon
Overlay the related intelligent informaon or POS informaon in the video.
10.4.5 Import or Export Blocklist & Allowlist
You can import and export the blocklist and allowlist as desired, and check the list content in this
interface.
Steps
1.
Click Browse to open the PC local directory.
2.
Find the blocklist & allowlist
le and click to select it. Click Open to conrm.
Note
●
The le to import should corresponds with the le template that is required by the camera.
You are recommended to export an empty blocklist & allowlist le from the camera as the
template and ll in the content.
●
The
le should be in the .xls format and the cell format should be Text.
3.
Click Import to import the selected le.
Network Camera User Manual
100