HIKVISION DS-2XS6A87G1-LS/4G - Page 30

Scheduled-Switch
Set the Start Time and the End Time to dene the duraon for day mode.
Triggered by alarm input
You can set Triggering Status as Day or Night. For example, if the Triggering Status is Night, the
mode turns into Night when the device receives alarm input signal.
Triggered by video
The camera switches between the day mode and the night mode according to the light
condion of environment. This mode is applicable when the device supports road trac and
vehicle detecon.
Note
●
Day/Night Switch funcon varies according to models.
●
You can turn on the smart supplement light for beer image eect. For supplement light
sengs, refer to Supplement Light Sengs .
Supplement Light Sengs
You can set supplement light and refer to the actual device for relevant parameters.
Smart Supplement Light
Smart supplement light avoids over exposure when the supplement light is on.
Supplement Light Mode
When the device supports supplement light, you can select supplement light mode.
IR Supplement Light
IR light is enabled.
White Light
White light is enabled.
Mixed Light
Both IR light and white light are enabled.
Smart
When you select this mode
aer enabling certain smart events or moon detecon, in the
night state, the default supplement light mode is IR supplement light mode. When the alarm
is triggered, the white light is enabled and the device captures the target.
Aer the alarm
ends, the supplement light mode will switch to IR supplement light mode.
Only device models with IR and white light or hybrid supplement light with IR and white light
support this
funcon.
O
Supplement light is disabled.
Network Camera User Manual
18