HIKVISION DS-2XS6A87G1-LS/4G - 5.2 Video Recording

5.3.3 Set Timing Wake
When the device is sleeping, it will wake up at the set me interval, and capture pictures and
upload them.
Steps
Note
The funcon is only supported by certain device models.
1.
Go to Conguraon → Proacve Mode → Power Consumpon Mode . Under Sleep Schedule,
click the
me schedule to set Sleep Capture Interval.
2.
Enter Conguraon → Proacve Mode → Timing Wake .
3.
Check Enable.
4.
Select Capture Types.
5.
For the linkage method
sengs, see Linkage Method Sengs .
6.
Click Save.
Result
The device will wake up at the set sleep capture interval, and capture pictures and upload them.
5.3.4 Guarding Schedule
The device can capture pictures within the set scheduled me period.
Steps
1.
Go to Conguraon → Proacve Mode → Guarding Schedule .
2.
Check Enable.
3.
Set the capturing schedule according to your need. For detailed
sengs, see Set Arming
Schedule .
Note
Timing Wake and Guarding Schedule cannot be enabled at the same me.
5.3.5 View and Download Picture
You can search, view and download the pictures stored in the local storage or network storage.
Steps
1.
Click Picture.
2.
Set search condion and click Search.
The matched pictures showed in the
le list.
3.
Select the pictures then click Download to download them.
Network Camera User Manual
32