HIKVISION DS-2XS6A87G1-LS/4G - Chapter 6 Event and Alarm; 6.1 Basic Event; 6.1.1 Set Motion Detection

Figure 6-2 Set Video Tampering Area
5.
Refer to Set Arming Schedule for seng scheduled me. Refer to Linkage Method Sengs for
seng linkage method.
6.
Click Save.
6.1.3 Set PIR Alarm
A PIR (Passive Infrared) alarm is triggered when an intruder moves within the detector's eld of
view. The heat energy dissipated by a person, or any other warm blooded creature such as dogs,
cats, etc., can be detected.
Steps
Note
Only certain models support PIR alarm.
1.
Go to Conguraon → Advanced Conguraon → Basic Event → PIR Alarm .
Network Camera User Manual
37