HIKVISION DS-2XS6A87G1-LS/4G - Device Auto Maintenance; View Open Source Software License; Time and Date; Synchronize Time Manually

9.10 Device Auto Maintenance
Steps
1.
Check Enable Auto Maintenance.
2.
Read the prompt informaon and click OK.
3.
Select the date and
me you want to restart the device.
4.
Click Save.
Note
This funcon is only available for Administrator.
Warning
Aer enabling auto maintenance, the device will automacally restart according to the
maintenance plan. The device cannot record video during the restarng process.
9.11 View Open Source Soware License
Go to Conguraon → System → System Sengs → About , and click View Licenses.
9.12 Time and Date
You can congure me and date of the device by conguring me zone, me synchronizaon and
Daylight Saving Time (DST).
9.12.1 Synchronize Time Manually
Steps
1.
Go to Conguraon → System → System Sengs → Time Sengs .
2.
Select Time Zone.
3.
Click Manual Time Sync..
4.
Choose one
me synchronizaon method.
-
Select Set Time, and manually input or select date and
me from the pop-up calendar.
-
Check Sync. with computer
me to synchronize the me of the device with that of the local
PC.
5.
Click Save.
9.12.2 Set NTP Server
You can use NTP server when accurate and reliable me source is required.
Network Camera User Manual
76