HIKVISION DS-2XS6A87G1-LS/4G - Install Server;Client Certificate; Install CA Certificate; Enable Certificate Expiration Alarm

9.21.4 Install Server/Client Cercate
Steps
1.
Go to
Conguraon → System → Security → Cercate Management .
2.
Click Create Self-signed Cercate, Create Cercate Request and Import to install server/client
cercate.
Create self-signed cercate Refer to Create Self-signed Cercate
Create cercate request Refer to Create Cercate Request
Import Cercate Refer to Import Cercate
9.21.5 Install CA Cercate
Steps
1.
Click Import.
2.
Enter the Cercate ID.
3.
Click Browser to select the desired server/client
cercate.
4.
Select the desired import method and enter the required informaon.
5.
Click OK.
Note
Up to 16 cercates are allowed.
9.21.6 Enable Cercate Expiraon Alarm
Steps
1.
Check Enable
Cercate Expiraon Alarm. If enabled, you will receive an email or the camera
links to the surveillance center that the cercate will expire soon, or is expired or abnormal.
2.
Set the Remind Me Before Expiraon (day), Alarm Frequency (day) and Detecon Time (hour).
Note
●
If you set the reminding day before expiraon to 1, then the camera will remind you the day
before the expiraon day. 1 to 30 days are available. Seven days is the default reminding days.
●
If you set the reminding day before expiraon to 1, and the detecon me to 10:00, and the
cercate will expire in 9:00 the next day, the camera will remind you in 10:00 the rst day.
3.
Click Save.
Network Camera User Manual
86