HIKVISION DS-7108HI-S Series

DS-7108HI-S series Net DVR User Manual
45
maybe the actual prerecord time is more than 5 seconds. On the other side, if the bit rate is high,
and set “PreRecord Time” as “30 Seconds”, the actual prerecord time maybe is less than 30
seconds.
PostRecord Time: When external alarm or motion alarm is stopped, DVR will continue
recording time. The options are: 5 Seconds (default), 10 Seconds, 30 Seconds, 1 Minute, 2
Minutes, 5 Minutes and 10 Minutes.
Enable Rec: Enable or disable selected camera record function. “×” means disable and “”
means enable.
Schedule: When you enable recording function, you can setup recording schedule.
Note: When the camera’s recording schedule is modified, please reboot DVR to make it
become effective.
All day recording setup:
Step 1: Enter recording schedule menu
In recording menu, use [ENTER] or [EDIT] key to enable record function (“” flag), press
“Schedule” button to enter recording schedule menu.
5.22 Recording schedule setup
Step 2: Select one day and enable all day recording option
For “Day” item, there are options: Monday, Tuesday, Wednesday, Thursday, Friday, Saturday
and Sunday. Use [↑] [↓] keys to select one day. Move “Active Frame” to the check box on the
right side of “All Day” item, press[ENTER]or[EDIT]key to enable “All Day” option. “×” means
disable and “” means enable.
Step 3: Record type
For “Rec Type” item, the options are: All Time, Motion Detect, Alarm, Motion|Alarm, and
Motion&Alarm, command.
For all day record mode, only one record type can be selected.
Step 4: Copy to other days
You can repeat step2 and step3 to setup for other days. Also you can copy the parameters of
current day to other days.