HIKVISION DS-D6055UN-B - Reset Password on the Client; Activation for Scene Two; Activate on the Client

2. Click ACTIVATE on
acvaon interface.
3. Enter password and conrm password.
4. Click ACTIVATE.
3.1.3 Reset Password on the Client
Steps
Note
You are highly recommended to reset password with the help of our technical support.
1. Click Export to export the restoraon le and send the le to our technical support.
Figure 3-5 Reset Password
2. Technical support will send you back a le. Click Import and select the le.
3. Enter Password, enter the same password in Conrm Password text-eld, and click OK.
3.2
Acvaon for Scene Two
3.2.1 Acvate on the Client
Before You Start
• Your computer used for running the client is on the same network segment with the terminal.
• Your terminal is powered on.
Steps
1. Go to Terminal Management.
2. Click
on the lower-right corner.
3. Select the terminals to acvate.
4. Click Acvate.
Digital Signage Quick Start Guide
7