HIKVISION DS-D6055UN-B - Page 22

8.
Oponal: Click Acquire Registraon Status to view terminal registraon status.
Register Terminals by IP Address
Steps
1. Go to Terminal Management.
2. Click Add Terminal.
Figure 4-4 Add Terminal
3. Select Adding Mode as Add by IP.
4. Enter Terminal IP Address and Port.
5. Enter Terminal Name and Terminal Password.
6. Click OK.
Register Terminals by Serial No.
Before You Start
1. Enter
informaon release soware in your terminal.
2. Click on the sidebar to obtain terminal serial No.
Steps
1. Click Terminal Management.
2. Click Add Terminal.
3. Select Adding Mode.
Digital Signage Quick Start Guide
14