HIKVISION DS-D6055UN-B - Register on the Terminal; Register Terminals for Scene Three; Register on the Client

Figure 4-5 Add Terminal by Serial No.
4. Enter Terminal Name, Terminal Serial No. and Descripon. Descripon is oponal.
5. Click OK.
6. Register the computer where
informaon release client to terminal.
1) Enter informaon release soware in terminal.
2) Click
on the sidebar.
3) Enter the informaon of the computer and informaon release client on the server
conguraon interface.
4) Click Save.
4.2.2 Register on the Terminal
The way of registraon on the terminal is the same as in Scene One. To acvate on the terminal,
refer to Register on the Terminal .
4.3 Register Terminals for Scene Three
There are three ways to register terminals in Scene Three.
• Register the terminal on the client.
• Register the terminal on the mobile phone.
• Register on the terminal.
4.3.1 Register on the Client
You can register the
acvated terminal to the client.
Before You Start
The terminal and the client are in the same network segment and the terminal is acvated.
Steps
1. Log into FocSign Client.
Digital Signage Quick Start Guide
15