HIKVISION DS-D6055UN-B - Page 34

Figure 8-2 Long press Back and Delete key
3. Long press key and key on the remote control at the same me unl the terminal pops up
the vericaon code.
Figure 8-3 Enter Vericaon Code (Bind)
Note
The system pops up a box for you to enter the vericaon code only when your terminals are
unbound to any remote controls.
4. Enter the vericaon code of the desired terminal in the countdown. If the vericaon code
disappears, go to the previous step.
5. Submit the
vericaon code.
Aer the following prompt box pops up, go to the next step.
Figure 8-4 Submit
Vericaon Code
Digital Signage Quick Start Guide
26