DS-Eco Series Workstation (Windows) User Manual
8
Chapter 2 Start Device up
Proper startup and shutdown procedures are crucial to extend your device life.
Step 1 Check the power supply is plugged into an electrical outlet. It is HIGHLY recommended to
use an Uninterruptible Power Supply (UPS) in conjunction with the device.
Step 2 Turn on the power switch at the rear panel.
Step 3 After power up, the device will enter OOBE model. You can select your region, prefereed
language, keyboard layout, and time zone.
Figure 2-1 Select Region
Step 4 Click Next.
Step 5 Click Accept if you accept the legal stuff.
To Next Page
Loading...