Video Access Control Terminal User Manual
30
Time Synchronization
Steps:
1. In the device list, click to select a single device, or select multiple devices by pressing Ctrl button on your
keyboard and clicking them one by one.
2. Click Synchronization button to start time synchronization.
A message box will pop up on the lower-right corner of the screen when the time synchronization is
compeleted.
Viewing Device Status
In the device list, you can select the device and then click Status button to enter view its status.
Door Status: The status of the connected door.
Host Status: The status of the host, including Storage Battery Power Voltage, Device Power Supply Status,
Multi-door Interlocking Status, Anti-passing Back Status, and Host Anti-Tamper Status.
Card Reader Status: The status of card reader.
Alarm Input Status: The alarm input status of each port.
Alarm Output Status: The alarm output status of each port.
Event Sensor Status: The event status of each port.
Secure Door Control Unit Status: The online status and tamper status of the Secure Door Control Unit.
Remote Configuration
Purpose:
In the device list, select the device and click Remote Configuration button to enter the remote configuration
interface. You can set the detailed parameters of the selected device.
To Next Page
Loading...
