Video Access Control Terminal User Manual
37
2. Check the Enable checkbox to enable the Wi-Fi function.
You can set the hot spot name and the password. Click Select to select the hot sport. Click Refresh to
refresh the Wi-Fi staus.
You can also set the NIC type.
Check the Enable DHCP checkbox to auto allocate the IP address, the subnet mask, the default gateway, the
MAC address the DNS1 IP address and the DNS2 IP address.
3. Click Save to save the settings.
Configuring Wireless Dail Status
Steps:
1. Click Network -> Wireless Dial.
To Next Page
Loading...
