Video Access Control Terminal User Manual
85
3. Click the card group from the list, and Add to select the card to add the card group.
Note: Please set the card permission and apply the permission setting to the access control device first. For
details, refer to 4.6 Permission Configuration.
You can click of the card group to edit the group name.
4. Input the Card Swiping Times for the selected card group.
Notes:
The Card Swiping Times should be larger than 0 and smaller than the added card number in the card
group.
The upper limit of Card Swiping Times is 16.
5. Select the effective time and expiry time for the selected card group.
Note: You can also click Card Group Management button on the Multiple Authentication tab page to set the
card group.
6. Click Next to enter the Add Authentication Group interface.
To Next Page
Loading...
