Video Access Control Terminal·User Manual
104
Steps:
1. Click Tool->Device Arming Control to pop up the Device Arming Control window.
2. Arm the device by checking the corresponding checkbox.
Then the alarm information will be auto uploaded to the client software when alarm occurs.
7.14 Live View and Playback Settings
Purpose:
The parameters for live view and playback, including picture format, pre-play duration, etc., can be
set.
Steps:
1. Open the System Configuration page.
2. Click the Live View and Playback tab to enter the Live View and Playback Parameter Settings
interface.
3. Configure the live view and playback parameters. For details, see Table 8-1 Live View and
Playback Parameters.
4. Click Save to save the settings.
To Next Page
Loading...
