HIKVISION DS-K3B530X Series - IR Adapter Board Terminal Description (Optional); General Wiring

4.3.10 IR Adapter Board Terminal Descripon (Oponal)
Figure 4-12 IR Adapter Board
Note
●
The main lane IR adapter board should be connected to the IR adapter terminal 1 of the main
lane control board.
●
The sub lane IR adapter board should be connected to the IR adapter terminal 1 of the sub lane
control board.
●
Set the No.1 of the 4-digit DIP switch to ON side.
4.3.11 General Wiring
The general wiring of lane control board, access control board and extended interface board.
DS-K3B530X Series Swing Barrier User Manual
24