HIKVISION DS-K3B530X Series - Keyfob Pairing

Figure 4-23 Normal Mode
6.
Power on the device again.
Note
For details about the DIP switch value and meaning, see DIP Switch Descripon.
The barrier will open automacally and turns back to the closed posion. At this circumstance,
the device enters the normal mode.
4.4.3 Keyfob Pairing
Pair keyfob via buon or DIP switch.
Pair Keyfob via
Buon
Pair the keyfob to the device via buon to open/close the barrier remotely.
Before You Start
Ask our technique supports or sales and purchase the keyfob.
Steps
Note
●
If the device is equipped with access control board, you can pair keyfob via DIP switch on the
access control board only.
●
For details about buon's operaon, see Conguraon via Buon .
●
For details about the
conguraon No. and its related funcon, see Buon Conguraon
Descripon .
●
For details about the keyfob operaon instrucons, see the keyfob's user manual.
1.
Enter the keyfob pairing mode.
1) Enter the conguraon mode.
2) Set the
conguraon No. in Level-1 to 2. The device will enter the keyfob pairing mode.
3) Set the conguraon No. in the Level-2 menu to 2. The device will enter the keyfob pairing
mode.
2.
Hold the Close
buon for more than 10 seconds.
The keyfob's indicator will ash if the pairing is completed.
DS-K3B530X Series Swing Barrier User Manual
35