HIKVISION DS-K3B530X Series - Set Audio Parameters; Event Linkage

.
6.5.8 Set Audio Parameters
Set the image quality, resoluon, and the device volume.
Set Audio Parameters
Click Conguraon → Video/Audio → Audio .
Figure 6-7 Set Audio Parameters
Drag the block to adjust the output volume.
Click Save to save the
sengs aer the conguraon.
You can also enable Voice Prompt.
Note
The funcons vary according to dierent models. Refers to the actual device for details.
6.5.9 Event Linkage
Set linked acons for events.
Steps
1.
Click Conguraon → Event → Event Detecon → Linkage Sengs to enter the page.
DS-K3B530X Series Swing Barrier User Manual
52