HIKVISION DS-K3B530X Series - Access Control Settings

-
If you choose Linkage Type as Employee ID Linkage, you need to enter the employee ID and
select the card reader.
3.
Set linked acon.
Linked Buzzer
Enable Linked Buzzer and select Start Buzzing or Stop Buzzing for the target event.
Linked Door
Enable Linked Door, check Entrance or Exit, and set the door status for the target event.
Linked Alarm Output
Enable Linked Alarm Output, check Alarm Output 1 or Alarm Output 2, and set the alarm
output status for the target event.
Linked Audio Prompt
Enable Linked Audio Prompt and select the play mode.
●
If you choose TTS, you need to set language and enter the prompt content.
●
If you choose Audio File, you need to select an available audio
le from the drop-down list
or click General Linkage Sengs to add a new audio le.
6.5.10 Access Control
Sengs
Set Authencaon Parameters
Click Conguraon → Access Control → Authencaon Sengs .
Note
The funcons vary according to dierent models. Refers to the actual device for details.
DS-K3B530X Series Swing Barrier User Manual
54