HIKVISION DS-K3B530X Series - Page 69

Set the door open duraon when rst person is in. Aer the rst person is authorized, it allows
mulple persons access the door or other authencaon acons.
Note
The duraon ranges from 1 s to 1440 s.
Serial Port Sengs
Set serial port parameters.
Steps
1.
Click Conguraon → Access Control → Serial Port Conguraon .
Figure 6-11 Serial Port Sengs
2.
Set the No., Baud Rate, Data Bit, Stop Bit and Parity.
3.
Set the Peripheral Type as Card Reader, QR Code Scanner or Disable.
4.
You can view the serial port type, connected device model and peripheral
soware version.
5.
Click Save.
Set Wiegand Parameters
You can set the Wiegand transmission direcon.
DS-K3B530X Series Swing Barrier User Manual
57