HIKVISION DS-K3B530X Series - Chapter 7 Configure the Device via the Mobile Browser; 7.1 Login; 7.2 Overview

Figure 6-12 Terminal Parameters
2.
Set the device working mode.
Permission Free Mode
The device will not verify the person's permission, but only the person's validity period. If the
person is in the validity period, the barrier will open.
You can enable Verify
Credenal Locally. Aer enabling the funcon, the device will only
verify the person's permission without the schedule template, etc.
Access Control Mode
The device works normally and will verify the person's permission to open the barrier.
3.
Set remote
vericaon.
1) Enable Remote Vericaon.
Note
The device will upload the person's authencaon informaon to the plaorm. The plaorm
will judge to open the barrier or not.
2) Oponal: Enable Verify Credenal Locally.
Note
Aer enabling the funcon, the device will only verify the person's permission without the
schedule template, etc.
4.
Click Save to complete terminal parameter sengs.
6.5.11
Turnsle
Basic Parameters
Set turnsle basic parameters.
DS-K3B530X Series Swing Barrier User Manual
59